All About koi specialize in Quality koi food and koi products and reviews koi food pond skimmers pergola Cards we except for payment

Order By Phone: 020 8386 0560 or 07956 255280
Home Your IP Address: 54.198.54.142
Saturday, September 23, 2017
 
 
MasterCard SecureCode - Protx Secured - Verfied by Visa

Valid XHTML 1.0 Transitional

Valid CSS!

60,000 BTU Heat Exchanger

Our Part Number: gm_60000Price: 174.9560,000 BTU Heat Exchanger
Points Credit: 17.50 points (currently valued at 1.75)


Retail Price: 209.95Your Price: 174.95You Save: 35.00 (16.67%)









Free Postage and Packing to Mainland Uk

Free Postage and Packing to Mainland Uk
Product Details

60,000 BTU Heat Exchanger

Description: Single coiled. 3,000 Gallons
Quantity: 900 Max GPH.

By utilising a heat exchanger you can create the most economical and efficient way to heat a Koi pond.

Linked to a boiler, the heat is transferred to the pond via the heat exchanger. The final selection of a heat exchanger should be ascertained by pond capacity, boiler output, heat retention properties and positioning of equipment.

The output specification of the heat exchanger is the maximum that may be reasonably expected the unit to produce, so it is therefore highly recommended to upgrade to the next output size if in any doubt.

It is important that the correct rated boiler is used for the size and gallonage of the pond and that the flow rates are not exceeded. The maximum flow rates for the primary and secondary circuits are stated on the label fixed on the front of the boiler along with the relevant rating of that specific heat exchanger. Manufactured from quality marine grade Type 316 stainless steel, each unit undergoes 12 stringent tests during quality control production.

Each unit is tested to 70 p.s.i before leaving the factory and each one is guaranteed for a full 12 months from purchase date, subject to essential conditions are strictly followed during the installation and working life.

All units must be installed vertically. Care must be taken to insure that no chemical residue can enter the heat exchanger when the system is not running. It is recommended to maintain a constant pH between 7.2 7.6 to prevent excessive scaling deposits and corrosion.

It is paramount that the unit is installed in an upright position; with the primary and flow connections from the boiler set top and bottom.

The secondary flow, which is the heated flow to the pond(usually after filtration), is then connected to the top right and the flow though which transfers the heated water to the pool will be situated at the lower left outlet. All threaded connections are BSP thread.





Look no further, step by step advanced koi diagnosis and treatments is out now! and will help in your understanding of many of the common and not so common ailments of Koi with step by step comic strip style pictures of how to treat these ailments